HOME MASTER HARDWARE Wood Gate Hardware Set - Heavy Duty 8" Decorative Strap Hinges and Spring Loaded Latch Gate Kit with Screws for Outdoor Fence Swing Gate Black Finish
Inhouse product
|
|
|
|
|
|
|---|---|---|---|---|---|
| 8" Heavy Duty Strap Gate Hinge | 6 in Hinge Self-Closing Gate Kit | 8 in Hinge Thumb Latch Gate Kit | 8 in Hinge Self-Adjusting Gate Kit | 8 in Heavy Duty Decorative T Hinge | |
|
|
|
||||
| Customer Reviews |
126
|
153
|
53
|
53
|
497
|
| Price | $31.99 | $18.99 | — | — | $28.99 |
| Unit Count | 6 Pack | 1 Set | 1 Set | 1 Set | 6 Pack |
To install latch & handle: When people stand inside the gate, the gate is pushed outward to open. Installation methods 1: Applicable right door opening
|
|
|
|
|---|---|---|
|
1. On the fence post, find the appropriate location for the latch and mark screw holes according to the height of personal use, tighten the screws. |
2. Close the gate and install the keeper bar (the position of the keeper bar should be aligned with the position of the latch lock hole), mark the screw holes, and tighten the screws. (Keeper Bar should be parallel to the ground.) |
3. Place the handle onto the keeper bar, mark the screw holes, and tighten the screws. Installation completed, please refer to figure 3. |
Installation methods 2: Applicable left door openingThe latch needs to be removed and installed again. The method of removing and installing the latch is as follows:
|
|
|
|
|
|---|---|---|---|
|
1)Twist out (1) take down (3), the product is split into 4 parts. (As shown in Figure |
2)Swivel assembly 4, and move it to the other side of (2) for assembly. (As shown in Figure |
3)Reassemble the(1)and(3). (As shown in Figure 4) |
4)Reassembly of the latch is complete. |
Installation methods 2: Applicable left door opening
|
|
|
|
|---|---|---|
|
1.On the fence post, find the appropriate location for the latch and mark screw holes according to the height of personal use, tighten the screws |
2.Close the gate and install the keeper bar (the position of the keeper bar should be aligned with the position of the latch lock hole), mark the screw holes,and tighten the screws.(Keeper Bar should be parallel to the ground.) |
3. Place the handle onto the keeper bar, mark the screw holes, and tighten the screws. Installation completed, please refer to figure 3. |
Related products
