Spurtar Brake Caliper Press Tool, Brake Caliper Tool Spreader, 4 in 1 Universal Disc Brake Caliper Compression Tool Ratchet Piston Spreader Automotive Tools for Car Brake Repair Installation Blue
Inhouse product
Spurtar Brake Caliper Press Tool, Car Ratcheting Brake Caliper Piston Spreader Press Tool
Time for a new set of pads? Spurtar brake caliper tool helps you to quickly and easily compress and align pistons into place to make room for thick replacement brake pads. Our professional brake caliper press is suitable for all disc brake caliper press ratchet wheels, brake tools and brake cylinder adjustment groups. Perfect tool for most large trucks and commercial vehicles. Be used on twin and quad piston fixed calipers, as well as single and twin piston floating calipers.
|
|
|
|
|---|---|---|
Spreads EvenlyCentrally located Spurtar brake pad spreader ratchet evenly distributes force to prevent misalignment of pistons to create space for easy removal and installation of bake pads |
Heavy-duty MaterialBrake caliper compression tool is made of premium quality hardened steel material, solid made. |
Non-Slip HanddleBrake piston compressor tool comes with cushioned grip handle which provides comfortable and easy grip when using |
|
|
|
|
|---|---|---|
Easy Removing Disc Brake CaliperThis item is for disc brake, not for drum brake. Detaching the brake caliper from the hub is fairly straightforward, as most calipers are held on by just two bolts. Some cars use brake pad wear sensors, which should be removed before you do anything. Once the caliper is unbolted, secure it to the car with your rope or bungee cord in such a way that there’s slack in the brake line (stretching or damaging it could cause problems down the line) |
Using Brake Piston CompressorWhen you have the caliper off the car, stick the brake piston compressor tool in between and use it to compress the piston(s) until the cylinder sits flush with the caliper face. Once you have access to the old pads, pop them out; you should be able to remove them by hand. Now place the new ones in. The base plate ends should have a specific shape to fit perfectly into it. Please check the Disc Brake size first. |
Attention When Replacing Brake Pad'sIf you fail to compress your pistons before putting the new pads in, they simply fit back onto the rotor. Make sure you put the pads on facing the correct direction. If the caliper is on sliders, always make sure those are clean. The pads' manufacturer will likely outline a bedding procedure found either printed on the box or included in the installation instructions. |
Specifications:
1x Brake Caliper Piston Spreader Tool
- 360 Degree Swing
- Heavy-Duty Hardened Steel
- Blue anti-slip silicon handle
- Weight 1.8 lb / 800 g
Package include:
1 x Brake Piston Caliper
2 x Hooks
Universal Disc Brake Caliper Pistion Tool
Necessary DIY tool for brake caliper replacement
Easy to install, easy to remove, can compress your brake pistons effortlessly in seconds. Our Brake caliper tool can be used for most car, truck, van, etc
A small tip for a case of unwork:
1. Both spreader plates need pressure to start the ratchet
2. Before expanding, leave a little free thread and then swing the wrench
Brake Caliper Expander is Suitable for Most Vehicles
• Doing brake pad replacement • Resetting the piston • Changing the brake • Doing other brake works • Twin piston fixed calipers • Quad piston fixed calipers • Single piston floating calipers • Twin piston floating calipers
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| 24" Universal Throttle Cable | Camshaft Phaser Timing Chain Tools Kit with a Box | Magnetic Alignment Fall Gauge | Inner Tie Rod Hex Wrench Tools 27-42mm | Inner Tie Rod Removal Tool - 3/8” inch | Camshaft Phaser Timing Chain Tools Battery Cable Lug | |
| Customer Reviews |
206
|
9
|
1,679
|
917
|
908
|
9
|
| Price | $17.79 | $21.99 | $17.79 | $14.99 | $11.99 | $13.99 |
| Application | Perfect for replacing damaged/old throttle cables. | Loosen the tension on the camshaft phaser timing chain tools during Camshaft and phaser service procedures on 3.6L Engine | Quick accurate checking of the castor and camber angle | Inner Tie Rod Hex Wrench Tools | Inner Tie Rod Removal Tool | Camshaft Locking Tool Set |
| Suitable for | Perfect for replacing damaged/old throttle cables. | VW Chrysler Jeep Dodge Grand Cherokee Wrangler 3.6L Engine | For most vehicle wheel alignments within a measurement range from -5 up to +5 degrees | Easily removes inner tie rod ends without removing rack and pinion | Able to remove inner tie rod without removing the outer tie rod | Replace10200A 10202 10369A |
| Size range | 24“ | 10200A+10202+10369A 6 PCS Cam Locking Tool with a lock box | 4.9" x 1.18" x 0.78" | 12.5 x 3 x 2 cm | 1''-1.65'' | 27-42mm | 3/8” | 9.5mm | 10200A+10202+10369A 6 PCS Cam Locking Tool |
| Material | Stainless Steel + Aluminum | Plastic | Brushed Alumnium | Heavy-Duty Steel | Heavy-Duty Steel | Plastic |
| Brand | Spurtar | Toolwiz | Toolwiz | Toolwiz | Toolwiz | Toolwiz |
